rev limiter - Page 5

Azzano62 · 21st January 2009, 09:27

Its Awsome, Will there be anymore updates for it because i cant wait

Tommy · 21st January 2009, 15:38

Well I consider project as finished since it works well.
I could optimize it to get less out of sync situations, but that would only fix 10% of it at most.

So the question is what could it do more? (considering revs only)

Xyron2.1 · 21st January 2009, 20:24

faster bounces!!! XD

no .. it is pretty much perfect.....

bennyfizzle · 22nd January 2009, 14:21

Quote:

Originally Posted by Tommy

Well I consider project as finished since it works well.
I could optimize it to get less out of sync situations, but that would only fix 10% of it at most.

So the question is what could it do more? (considering revs only)

how about the ability to set a two-stage rev limiter, for example, hit a hotkey to limit your revs to 4k to build boost or w/e, then hit hotkey again to set it back to the normal limiter.

doable?

G!NhO · 22nd January 2009, 14:22

a sort of launch control

Tim_J_23 · 22nd January 2009, 15:01

Quote:

Originally Posted by G!NhO

a sort of launch control

It actually is, helps in the starts

rich_hobo94 · 26th January 2009, 12:52

only downside: not being able to run it and CSR at the same time

jonny dank · 27th January 2009, 03:37

+1 there, a few months ago i tried using the outgauge program monk made and it worked with every outgauge app i used EXCEPT this one... my favorite one... so i just use this now lol. love it!

Tommy · 27th January 2009, 09:16

ok, so:
- launch control (user set revs) turned on with a button, that turns off after certain speed (or a button)
- compatibility with monks multi outgauge program

i will write something as soon as I pass the exam session

Jamesisinthehouse12 · 27th January 2009, 09:59

awesome!
Sounds great Tommy!

jonny dank · 27th January 2009, 11:23

looking forward to it

Azzano62 · 28th January 2009, 23:47

cool i cant wait

Rolverts · 7th February 2009, 20:13

Dont work on me:/ I did everything like in install but nothing happens.

Jamesisinthehouse12 · 7th February 2009, 21:50

well, then you didn't do it properly then...

Rolverts · 8th February 2009, 07:42

Well one problem is this:
in cfg.txt there have to be like this
OutGauge Mode 2
OutGauge Delay 5
OutGauge IP 127.0.0.1
OutGauge Port 11222
OutGauge ID 2
But if i save the file then it is like this:
OutGauge Mode 0
OutGauge Delay 1
OutGauge IP 127.0.0.1
OutGauge Port 11222
OutGauge ID 2
I dont know whats the problem.

jonny dank · 8th February 2009, 17:14

afaik(could be wrong) that doesn't really matter, the port is all that counts in most cases... and yours look just fine

Jamesisinthehouse12 · 9th February 2009, 06:58

you ARE starting up the "LfsRevLimiter.0.9.exe" everytime you open lfs right?
also make sure that the ignition key (usually "i") is the ignition key.

Download it from my post (the one with the settings already added)
http://www.lfsforum.net/showthread.p...79#post1044979
Enjoy!

Quote:

Settings File Only:

Settings.zip (722 Bytes)

LFS Rev Limiter v0.9 with Settings:

LFS Rev Limiter v0.9 with Settings.zip (31.5 KB)

Rolverts · 9th February 2009, 12:17

Yea, Lfs then lfs limiter. And yea, ignition key is "i". K i try with there two.

E:
There has to be?
RPM: CAR:none

?

What ignotion key exactly for? I mean what i have to do. I start lfs, then i start lfs limiter, going to play, and what next?

Jamesisinthehouse12 · 9th February 2009, 13:53

so you have the "LFS Rev Limiter v0.9 with Settings" now?
and the ignition key is needed so the program can turn the cars engine on and off, hence producing the bouncy effect...

Edit:
start lfs, lfs limiter, minimize lfs limiter and play lfs

Edit 2:
If it still doesn't work, I would recommend creating a fresh lfs install (maybe a separate one) and trying it on that.

Rolverts · 9th February 2009, 14:04

Yep, don't work, ok ill try new one.

Ok I Start lfs, then limiter, then just starting playing? or i have to do something first? It doesent work.

jonny dank · 9th February 2009, 15:09

did you ever set the rev limit in the program?

Rolverts · 9th February 2009, 19:07

Yes but how the Car and RPM comes? In my program its always car: none.

Rolverts@hotmail.com someone please help.

E: if i start lfs comes this message: OutSim::UDPConnect : connect failed
Dont know if this is important or not.

Jamesisinthehouse12 · 10th February 2009, 07:07

Quote:

Originally Posted by jonny dank

did you ever set the rev limit in the program?

if you read the comments above, you would know he doesn't need this...

Quote:

Settings File Only:

Settings.zip (722 Bytes)

LFS Rev Limiter v0.9 with Settings:

LFS Rev Limiter v0.9 with Settings.zip (31.5 KB)

Rolverts · 10th February 2009, 11:48

Okay:/ I can't get this work i think

anyone could help then please add to msn: Rolverts@hotmail.com

jonny dank · 10th February 2009, 17:34

that's what i had to do for every car

Jonny B. · 14th February 2009, 04:07

Ican't install it

Tommy · 16th February 2009, 08:42

If program reports that the selected car is None (when driving one) then you probably have problem with proper outgauge configuration. Config lines should not be doubled (e.g. line containing "OutGauge Mode" occurs more than once in file)

@Rolverts - check if the cfg.file has a "archive" flag on it - it shouldn't

Rolverts · 16th February 2009, 13:55

Yes thanks, now it saves correctly, but how i can check or change that outgauge configuration.

Got it work. Very cool, but sometimes engine turns off, thats bad

But thanks guys. Weird. When i hit the gas and it hits the rev and then when i release the gas for the shifting, engine turns off.

D-Kid · 23rd February 2009, 06:42

man, i really love this rev limit program..

here's a suggestion i've been thinking as an upgrade for this limiter..

y dont we use the shift light as the indicator..wut i mean is this

-u rev up to d max...shift light turns on, engine dies
-when shift light turns off, engine starts

the program uses the shift light to indicate when to pres the ignition button..therefore there wouldn't b any mis-sync and sudden engine stall..

can sum 1 do this? i really want to c how it goes...i'm expecting fast rev bbounce LOL...my engine always stalls if i put the delay below 32...

sorry 4 my english...
anyone can do dis? would b great...

fspecial · 26th February 2009, 13:32

This program is so awesome!
works perfect!!

thnx Tommy

21st January 2009, 09:27	#121 -
Azzano62 S2 licensed Racername: WS • RacerX Join Date: Jul 2008 Location: Australia Posts: 119	Its Awsome, Will there be anymore updates for it because i cant wait __________________ WS • RacerX. Windstyle Developer.

21st January 2009, 15:38	#122 -
Tommy S2 licensed Racername: [SAIKO^D]Tommy Join Date: Mar 2003 Location: Gdańsk,Poland Posts: 35	Well I consider project as finished since it works well. I could optimize it to get less out of sync situations, but that would only fix 10% of it at most. So the question is what could it do more? (considering revs only) __________________ [SAIKO^D]Tommy http://www.saikod.com

27th January 2009, 03:37	#128 -
jonny dank S2 licensed Racername: Jonny Dank Join Date: Mar 2008 Location: Annapolis,Maryland Posts: 273	+1 there, a few months ago i tried using the outgauge program monk made and it worked with every outgauge app i used EXCEPT this one... my favorite one... so i just use this now lol. love it! __________________ http://www.youtube.com/watch?v=nxC94...eature=related

27th January 2009, 09:16	#129 -
Tommy S2 licensed Racername: [SAIKO^D]Tommy Join Date: Mar 2003 Location: Gdańsk,Poland Posts: 35	ok, so: - launch control (user set revs) turned on with a button, that turns off after certain speed (or a button) - compatibility with monks multi outgauge program i will write something as soon as I pass the exam session __________________ [SAIKO^D]Tommy http://www.saikod.com

27th January 2009, 09:59	#130 -
Jamesisinthehouse12 S2 licensed Racername: James Norman Join Date: Mar 2007 Location: Perth, Australia Posts: 655	awesome! Sounds great Tommy! __________________ S2 Licence: 17th July 2007 Projects: VW Sirocco - Sporty Seats VW Sirocco - Sporty Gear Nob and Handbrake "We're glad LFS is growing in beauty" club Last edited by Jamesisinthehouse12; 27th January 2009 at 10:46.

21st January 2009, 20:24	#123 -
Xyron2.1 Demo Racer Racername: Xyron2.1 Join Date: Jan 2009 Location: Pålberget Posts: 54	faster bounces!!! XD no .. it is pretty much perfect.....

22nd January 2009, 14:22	#125 -
G!NhO S2 licensed Racername: G. van Verseveld Join Date: Jan 2008 Location: Holland Posts: 6,312	a sort of launch control

26th January 2009, 12:52	#127 -
rich_hobo94 S2 licensed Racername: SlideShow Join Date: Jul 2008 Location: Sydney, Australia Posts: 53	only downside: not being able to run it and CSR at the same time

27th January 2009, 11:23	#131 -
jonny dank S2 licensed Racername: Jonny Dank Join Date: Mar 2008 Location: Annapolis,Maryland Posts: 273	looking forward to it __________________ http://www.youtube.com/watch?v=nxC94...eature=related

28th January 2009, 23:47	#132 -
Azzano62 S2 licensed Racername: WS • RacerX Join Date: Jul 2008 Location: Australia Posts: 119	cool i cant wait __________________ WS • RacerX. Windstyle Developer.

7th February 2009, 20:13	#133 -
Rolverts S2 licensed Racername: Ollu \| EST Join Date: Feb 2008 Location: Estonia, Elva Posts: 35	Dont work on me:/ I did everything like in install but nothing happens.

7th February 2009, 21:50	#134 -
Jamesisinthehouse12 S2 licensed Racername: James Norman Join Date: Mar 2007 Location: Perth, Australia Posts: 655	well, then you didn't do it properly then... __________________ S2 Licence: 17th July 2007 Projects: VW Sirocco - Sporty Seats VW Sirocco - Sporty Gear Nob and Handbrake "We're glad LFS is growing in beauty" club

8th February 2009, 07:42	#135 -
Rolverts S2 licensed Racername: Ollu \| EST Join Date: Feb 2008 Location: Estonia, Elva Posts: 35	Well one problem is this: in cfg.txt there have to be like this OutGauge Mode 2 OutGauge Delay 5 OutGauge IP 127.0.0.1 OutGauge Port 11222 OutGauge ID 2 But if i save the file then it is like this: OutGauge Mode 0 OutGauge Delay 1 OutGauge IP 127.0.0.1 OutGauge Port 11222 OutGauge ID 2 I dont know whats the problem.

8th February 2009, 17:14	#136 -
jonny dank S2 licensed Racername: Jonny Dank Join Date: Mar 2008 Location: Annapolis,Maryland Posts: 273	afaik(could be wrong) that doesn't really matter, the port is all that counts in most cases... and yours look just fine __________________ http://www.youtube.com/watch?v=nxC94...eature=related

9th February 2009, 12:17	#138 -
Rolverts S2 licensed Racername: Ollu \| EST Join Date: Feb 2008 Location: Estonia, Elva Posts: 35	Yea, Lfs then lfs limiter. And yea, ignition key is "i". K i try with there two. E: There has to be? RPM: CAR:none ? What ignotion key exactly for? I mean what i have to do. I start lfs, then i start lfs limiter, going to play, and what next? Last edited by Rolverts; 9th February 2009 at 12:24.

9th February 2009, 13:53	#139 -
Jamesisinthehouse12 S2 licensed Racername: James Norman Join Date: Mar 2007 Location: Perth, Australia Posts: 655	so you have the "LFS Rev Limiter v0.9 with Settings" now? and the ignition key is needed so the program can turn the cars engine on and off, hence producing the bouncy effect... Edit: start lfs, lfs limiter, minimize lfs limiter and play lfs Edit 2: If it still doesn't work, I would recommend creating a fresh lfs install (maybe a separate one) and trying it on that. __________________ S2 Licence: 17th July 2007 Projects: VW Sirocco - Sporty Seats VW Sirocco - Sporty Gear Nob and Handbrake "We're glad LFS is growing in beauty" club

9th February 2009, 14:04	#140 -
Rolverts S2 licensed Racername: Ollu \| EST Join Date: Feb 2008 Location: Estonia, Elva Posts: 35	Yep, don't work, ok ill try new one. Ok I Start lfs, then limiter, then just starting playing? or i have to do something first? It doesent work. Last edited by Rolverts; 9th February 2009 at 14:18.

9th February 2009, 15:09	#141 -
jonny dank S2 licensed Racername: Jonny Dank Join Date: Mar 2008 Location: Annapolis,Maryland Posts: 273	did you ever set the rev limit in the program? Attached Thumbnails __________________ http://www.youtube.com/watch?v=nxC94...eature=related

9th February 2009, 19:07	#142 -
Rolverts S2 licensed Racername: Ollu \| EST Join Date: Feb 2008 Location: Estonia, Elva Posts: 35	Yes but how the Car and RPM comes? In my program its always car: none. Rolverts@hotmail.com someone please help. E: if i start lfs comes this message: OutSim::UDPConnect : connect failed Dont know if this is important or not. Last edited by Rolverts; 9th February 2009 at 19:25.

10th February 2009, 11:48	#144 -
Rolverts S2 licensed Racername: Ollu \| EST Join Date: Feb 2008 Location: Estonia, Elva Posts: 35	Okay:/ I can't get this work i think anyone could help then please add to msn: Rolverts@hotmail.com

10th February 2009, 17:34	#145 -
jonny dank S2 licensed Racername: Jonny Dank Join Date: Mar 2008 Location: Annapolis,Maryland Posts: 273	that's what i had to do for every car __________________ http://www.youtube.com/watch?v=nxC94...eature=related

14th February 2009, 04:07	#146 -
Jonny B. Demo Racer Join Date: Jan 2009 Posts: 18	?????? Ican't install it
Jonny B. Demo Racer Join Date: Jan 2009 Posts: 18

16th February 2009, 08:42	#147 -
Tommy S2 licensed Racername: [SAIKO^D]Tommy Join Date: Mar 2003 Location: Gdańsk,Poland Posts: 35	If program reports that the selected car is None (when driving one) then you probably have problem with proper outgauge configuration. Config lines should not be doubled (e.g. line containing "OutGauge Mode" occurs more than once in file) @Rolverts - check if the cfg.file has a "archive" flag on it - it shouldn't __________________ [SAIKO^D]Tommy http://www.saikod.com

16th February 2009, 13:55	#148 -
Rolverts S2 licensed Racername: Ollu \| EST Join Date: Feb 2008 Location: Estonia, Elva Posts: 35	Yes thanks, now it saves correctly, but how i can check or change that outgauge configuration. Got it work. Very cool, but sometimes engine turns off, thats bad But thanks guys. Weird. When i hit the gas and it hits the rev and then when i release the gas for the shifting, engine turns off. Last edited by Rolverts; 16th February 2009 at 14:02.

23rd February 2009, 06:42	#149 -
D-Kid Demo Racer Join Date: Nov 2008 Posts: 1	man, i really love this rev limit program.. here's a suggestion i've been thinking as an upgrade for this limiter.. y dont we use the shift light as the indicator..wut i mean is this -u rev up to d max...shift light turns on, engine dies -when shift light turns off, engine starts the program uses the shift light to indicate when to pres the ignition button..therefore there wouldn't b any mis-sync and sudden engine stall.. can sum 1 do this? i really want to c how it goes...i'm expecting fast rev bbounce LOL...my engine always stalls if i put the delay below 32... sorry 4 my english... anyone can do dis? would b great...
D-Kid Demo Racer Join Date: Nov 2008 Posts: 1

26th February 2009, 13:32	#150 -
fspecial S2 licensed Join Date: Dec 2008 Posts: 5	This program is so awesome! works perfect!! thnx Tommy
fspecial S2 licensed Join Date: Dec 2008 Posts: 5

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode