technically wouldn't be "lega" in the sense of racing since LMP type cars have to be to one side (not in center)

looks pretty good though; either im seeing bumps or something, guessing you used poly modeling so thats what im seeing, and your AA could deffinetly use some help if your going to render like that (mitchell-netravali is the most commonly used filter type)

looks pretty good nonetheless though

Here's my entry, a mid-engine four-wheel drive concept car; environmentally friendly too!

Quote from Dumpy :

Here's my entry, a mid-engine four-wheel drive concept car; environmentally friendly too!

Steam engines FTW!

Dumpy: LOL!!!
Im a little racecar, short and stout
Here is my handle, Here is my v12...

one hell of a BOV dont you think?

Quote from XCNuse :

progress is.. well usually good (is in this case i hope)

i seriously wished we had this car in LFS would so be a perfect match for the LX6

http://photobucket.com/albums/ ... etta%20G4/th_72f8a80d.jpg

http://photobucket.com/albums/ ... etta%20G4/th_d634b402.jpg

I really like your car. Would it be possible to se a larger picture of it or is it just me seeing a small small picture. It don't have to be a fancy render, the car looks good without.

Quote from Taavi(EST) :

ok it's not much but it's a start...mixing part 1 (ford writing will not be included in the final version...)

I found a tutorial with that car...are you using Blender? I am just starting to learn blender been doing some in 3ds max before

I am working on a race Porsche at the moment but this car could perhaps be a part of LFS (Suzuki GSX-R 4):

If this is still open to contestants, i have a concept idea (mainly to increase my portfolio for uni) that i might start soon.

lol i guess your hte only person seeing the thumbnails then:
http://s15.photobucket.com/albums/a392/XCNuse/Ginetta%20G4/

We have a G4R here Nuse if you want piccies/details.

Quote from XCNuse :

lol i guess your hte only person seeing the thumbnails then:
http://s15.photobucket.com/albums/a392/XCNuse/Ginetta%20G4/

Shure looks good

really? i didn't know you had one, my dad used to race one
which i didn't even know about until he saw me racing it one day on GT4

dunno i might go back to that project at some time, i believe the wire on that one is clean, the doors and interior will have to be redone from scratch but, i'll give you a heads up if i go back to it

Here is a picture, taken at Rockingham last year during a Ginetta Owners Club meeting. Shortly after it did a few laps of the track, which was nice, and confirmed what a dull waste of space Rockingham is.

Quote from tristancliffe :

Here is a picture, taken at Rockingham last year during a Ginetta Owners Club meeting. Shortly after it did a few laps of the track, which was nice, and confirmed what a dull waste of space Rockingham is.

Nice looking car!

Can we have real cars to enter, or do we have to make them up?

preferably made up, since no ordinary cars will be put into LFS.

@tristan, here is my dad's, and apparently its the only picture that exists of it

Quote from XCNuse :

preferably made up, since no ordinary cars will be put into LFS.

@tristan, here is my dad's, and apparently its the only picture that exists of it

woah, whats the car in the background

Tavvi..omg i loove ur model...i understand what ur doing with the fenders but they look a little to big...just a little smaller would make it even tighter and like on the veilside 350z wide body kit u should try and put some bolt holes in the fenders....that looks sooo tight

Quote from carmaniac1993 :

Tavvi..omg i loove ur model...i understand what ur doing with the fenders but they look a little to big...just a little smaller would make it even tighter and like on the veilside 350z wide body kit u should try and put some bolt holes in the fenders....that looks sooo tight

That Escort was truly F***d up and i lost the model with my old HDD. I have a new one in the works tho, but it's not an escort anymore.

Um, sorry to bump this topic up

Here's the new project:

My first proper attempt at 3D modelling, sort of an M8A but finding good shots of the windscreen and the front seems a bit difficult. Found 3D modelling surprisingly easy trying to grasp how the rFactor graphics system works and how to begin to attempt to get it into rF completely over my head

How can u do that 3D model.
What program do u use?

Quote from tonyonparas :

How can u do that 3D model.
What program do u use?

Ever tried searching? This isnt a thing you can explain in a post, but the program is 3dsMax

*Rolf Harris voice*

"Can you tell what it is yet?"

I'm having a play with NURMS.

Looks good! =)

a volvo 850 to be more precise! (possibly the old BTCC touring car?)