Wheel advice (Trust F1 Racemaster USB)

[BlackSpider]

Howdy,

Odd question. I have the topic-mentioned wheel. I've calibrated it, but I still get this problem. The gas pedal doesn't work quite 'right'. It jumps up in power. For example, if I press slighty harder, the ingame 'gas' bar stays still, then jumps up a bit, then stays still. Sensitivity is awful, in other words. Does anyone know how to solve this?

They don't have any specific drivers; they use Winbloze generic drivers.

Any advice, at all?

[Pakalulu]

Hi,

I 've had the same problem with the exact same wheel....

Check if the gas paddle behind the wheel works allright. If so, then be sure the 'gaspedal pot' in your pedal set is your source of problems..

In my case the pot (the adjustable resistor attached to the gas pedal) needed cleaning...just unscrew the bottom of the pedalset and use some cleaning spray (for cleaning contacts) inside the pot thingy...


Cheers

[AndroidXP]

I think you can also change the motion range with DXTweak so the pedal reaches its max value without actually reaching its physical limit. A little "dead zone" at the end so to say.

E: Oh, besieds that, there's an actual Racing Wheels (http://www.lfsforum.net/forumdisplay.php?f=15) subforum ;)