problems with lfs lapper

[UKMANUK]

need help asap ive set lapper up but it wont start up and not sure why

here is my config pls let me know if anything is wrong with cfg>>>


# Host IP. When more network interfaces are present, set it to IP of your host.

Host =127.0.0.1;

# Insim UDP port.
# Before starting LFSLapper you must configure LFS server to use this port for InSim.
# You can do that in command line when starting LFS (/insim=29999) or in talk window of LFS (/insim 29999).;

Port =29999;

# Change Password to match Admin password on LFS server.
# Usually this is the only value that needs to be modified for this default script to work.

Password =7997997;

TrackInfoFile = trackInfo.cfg;


TCPmode =true;

#Register your server on FRH TEAM WEB To have a list of Server Running Lapper
EnableRegisterWeb = true;

# How much time will big text messages last (text that is started by rcm_all command).
# In milliseconds.

MessageTime =5000;

# Identification for connect to PubStat : To obtain PubStatIdk go to www.lfsworld.net,
# select My LFSW Setting and select tab Pubstat Access
# The better way is obtain and idk, send login and pass on net it's not safe

PubStatIdk =;


# Enable if you want to show control config of players when leaving the pit.

ShowPlayerControl =true;

################################################## ###################
# FTP transfer #
################################################## ###################
# Results files can also be transferred to FTP server.
# Define following parameters to use this feature.
#-------------------------------------------------------------------

#FtpServer = your ftp server;
#FtpLogin = your login;
#FtpPasswd = your password;
#FtpRemotePath = your remote dir;

################################################## ###################
# Sync Database Options #
################################################## ###################
# SyncID = Sync Unique ID for this Lapper;
# SyncDir = Sync Directory name for Synchronization, all Lappers to be Synchronized must have same Directory;
# SyncIDsToSync = All Lappers ID To synchronize with you, you can't put here your current Sync Unique ID;
#-------------------------------------------------------------------

SyncID=frh48;
SyncDir=../sync;
SyncIDsToSync=frh84;

[baSh0r]

dont publish your pubstatidk

[NotAnIllusion]

An error message would be helpful. Run lapper from command prompt and it won't close when it quits due to the error.

-Check that your insim port is correct
-Check that your password is correct
-Check that you have actually started insim

[UKMANUK]

id better get e new one lol sorry my bad

[UKMANUK]

insim starts it self or am i wrong

[NotAnIllusion]

You need to tell InSim to start itself in the LFS config file. If the insim line starts with '//insim=...' then it will not start on its own. If the line reads '/insim=...' then it will.

[UKMANUK]

LFSLapper Version=5.5.2.35222 on GNU license
2005-2008 Janez Cufer and Robert BRACCAGNI ( Gai-Luron )
LFSLapper comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions. Read LICENSE for details.

Loading WR...Not Loaded
Mode Sync = True
Connecting........................................ .
The following error occurred:
No connection could be made because the target machine actively refused it 127.0
.0.1:29999
LFSLapper
at TcpConnection.Connection.Connect() in C:\Program Files\lfs\DevInsim\lapper
\LFSLapper5.52\src\tcp.cs:line 123
at InSim.Connect.insimConnectTCP(String host, Int32 port, String adminPasswor
d, String mode, String nameApp, Boolean isLocal) in C:\Program Files\lfs\DevInsi
m\lapper\LFSLapper5.52\src\InSim4.cs:line 239
at InSim.Connect.insimConnect(String host, Int32 port, String adminPassword,
String mode, String nameApp, Boolean isLocal, Boolean TCPmode) in C:\Program Fil
es\lfs\DevInsim\lapper\LFSLapper5.52\src\InSim4.cs :line 218
at LFSLapper.LFSClient..ctor(String scriptfilename, debug Pdebug, Boolean deb
ugmode) in C:\Program Files\lfs\DevInsim\lapper\LFSLapper5.52\src\LFSCli ent\lfsc
lient.cs:line 737
at LFSLapper.LFSLapper.Main(String[] Args) in C:\Program Files\lfs\DevInsim\l
apper\LFSLapper5.52\src\Main.cs:line 86
Void Connect()

Save Debug Infos

[UKMANUK]

You need to tell InSim to start itself in the LFS config file. If the insim line starts with '//insim=...' then it will not start on its own. If the line reads '/insim=...' then it will.

theres no / replaced by #


i had this working once now it wont

[NotAnIllusion]

LFS config file and Lapper config file are two different things. That error message tells you that InSim is not working on the port you specified. Try the manual way of enabling InSim, then start Lapper.

[UKMANUK]

how do i do it manualy

[NotAnIllusion]

Read the LFS documentation, or even your own post:
# You can do that in command line when starting LFS (/insim=29999) or in talk window of LFS (/insim 29999).;
In other words: Start LFS. Press 'T', type /insim 29999, press enter. If it works you will see a grey message telling you InSim is enabled.

[UKMANUK]

supposing it dont work

[UKMANUK]

it come up with tcp bind failed and insim not initialised

[NotAnIllusion]

That means something is already using the port. Maybe you have multiple instances of LFS open and one of them has InSim on that port. Either way, easy way out is to use a different port. Just make sure you have the same port number in LFS and the Lapper config.

[UKMANUK]

ive tryed so hard to get this working

[UKMANUK]

were is the lfs cfg file

[UKMANUK]

got to get this working now were do i change this insim port wat 2 files and were are they :(

[NotAnIllusion]

It appears that if you're using the graphical client (the one where you can race), you don't get one anymore (I don't have one). If that's the case, you need to use the manual method or modify the LFS shortcut. There's no point modifying the shortcut until the manual method works. If you use the dedicated server, it's in the same folder as LFS.exe.

Also, to check the game port and password that the LFS graphical client expects:
-Start LFS
-Click on Multiplayer
-Click on Start new host
-Select a track if it asks you, doesn't matter which
-The 'Admin Password' line must be the same as in your Lapper config file (the one you posted)
-The 'Port' line must *not* be the same as in your Lapper config file (default is 63392)

Tbh, I'd suggest you restart your PC, start LFS, type in the '/insim 29999' line and try Lapper again. After you've checked your password.

[UKMANUK]

this is the file

[NotAnIllusion]

this is the file
See my post above. If you use the graphical client you don't get the config file anymore.

edit: You should not need to have anything in the 'IP Address' line. Try leaving it blank :shrug:

[UKMANUK]

c im using dedi server cos i leave it running over nite and day i got it working but then 2 days later it stoped working

[pliktro]

Can somebody tell how to run and setup lfs lapper for dedi server?There is no commandline.
Thanks!

[Yisc[NL]]

Can somebody tell how to run and setup lfs lapper for dedi server?There is no commandline.
Thanks!

When you start your dedi-server using a config-file you have to add the following line:

/insim=29999

If you start your dedi-server without a config-file you have to type the following in the console:

/insim 29999

[pliktro]

;880260']When you start your dedi-server using a config-file you have to add the following line:

/insim=29999

If you start your dedi-server without a config-file you have to type the following in the console:

/insim 29999

Thanks i figured out.The problem was i changed the port because i use the the port 29999 for remote.Now everything works fine.

[Corey-McA]

i dont know how to get the file where i can change my password so i have to put my admin password to nothing. i was wondering if any one could help me plz.

[sinanju]

i dont know how to get the file where i can change my password so i have to put my admin password to nothing. i was wondering if any one could help me plz.

If you look in your "default_1.ini" file under default folder.

Your password should be about 1 of 3 lines of text in the .ini file.

[BMW M3GTR]

c im using dedi server cos i leave it running over nite and day i got it working but then 2 days later it stoped working





i can help u with this.
ima start all over , first get a dedi server and run it then download any lapper u want or u have and open it then go to Bin folder then press on the lfslapper
one witch is cfg and open it with noted and put ur ip there and put ur server admin pass there, the pass has to be 3 latter or numbers and then save it then go to ur dedi server and type in /insim 29999 then go run the lapper and thats it enjoy it . any questions send here kamranislamov@hotmail.com
becouse i dont like texting here :D

[commandermas]

if the password and everything else is correct, i have got something that definitely will help you. I had the same problem, so i thought, that it had to do with the ip.

i had hamachi (hamachi.cc) installed and that creates another ip for your pc. I used that ip (started hamachi and connected and so on) and it worked for me.