Disassembled DFP (real wheel anyone?)

[ozzu2000]

I always thought about adding a real driving wheel to the DFP, so today I disassembled the thing to find out how to remove the wheel. Only after opening the entire case I found out that to remove the wheel you dont have to touch anything else :D
Here's how to do it:
-remove the GT badge, it's only glued (the little screws do nothing)
-remove the 4 big screws
-pull and disconnect the plug
Done! :thumb:

Now, anyone has ideas on how to put a wheel here?
Anyone willing to try? :D

http://i16.photobucket.com/albums/b28/jpsa2005/DSC03231.jpg
http://i16.photobucket.com/albums/b28/jpsa2005/DSC03228.jpg
http://i16.photobucket.com/albums/b28/jpsa2005/DSC03229.jpg
http://i16.photobucket.com/albums/b28/jpsa2005/DSC03230.jpg

[mcintyrej]

To add a proper wheel, i think you would have to either create a bracket which slots into the wheel base, just like the DFP wheel does...Or:

Buy a FREX kit. I'd go for this:

http://www.frex.com/gp/wheeladapter/index.htm

With one of these:

http://www.frex.com/gp/steering/wheel11only01a200.JPG

[kaynd]

Or if you like the DYI thing you can try something like this :) http://home.comcast.net/~seekeating/r/WheelReplace/ (http://home.comcast.net/%7Eseekeating/r/WheelReplace/)

[anarchypredator]

I have the same project in progress!Today I will see if I can found a cheap wheel...

[anarchypredator]

And here it is!

[StableX]

for the serious racer! interesting H-shift!