G25 pedals

[skidpro]

Hi, I want to try this sim. but my G25 pedals gas brake clutch do not work. They work fine on gtr2. What do I need to do?

[Davo]

Untick 'combined pedals' in the wheel settings.

[skidpro]

I changed it to seperate still no go, no matter what I have tryed they don't work. Steering works without force feedback and wheel buttons work but pedals dead?

[Davo]

Force feedback doesn't work either? is your wheel being detected by lfs, as in does it show up under controls? Do you use the profler? Might want to add a profile for lfs and adjust your settings there. Sometimes my wheel deoesn't work properly if the profiler isn't working or hasn't detected the wheel properly.

[dawesdust_12]

Davo, I don't use the profiler at all with my G25 and it works gold other than when I first got it I needed to restart.

[skidpro]

Wheel is being detected, Maybe I need to change axis or something . Really starting to wonder if something is wrong with the whole game?

[Davo]

I didn't even know you could use it without profiler I thought it was part of the software needed. I use it to set the rotation and force feedback strength in lfs and other games, although don;t really need it since the only game I play is lfs nowadays.

If you're using teh latest version 0.5V the g25 should automaticaly be detected and the pedals and some keys assigned. Are the bars on the right moving when you press the pedals? Maybe they just need to be assigned to the right function. Give us a screenshot of your controls page.

[dawesdust_12]

Don't think so, because my G25 works perfectly. I think you may need to assign the axis if the buttons work, and FFB is prolly disabled.

[skidpro]

Best I could get was brake worked for throttle even though axis assigned different steering off center throttle worked for brake even though assigned different what a mess.

[Gunn]

Wheel is being detected, Maybe I need to change axis or something . Really starting to wonder if something is wrong with the whole game?I have a G25 so I can assure you that there is nothing wrong with "the whole game". You just need to carefully go through the setup process again. If your controller works in another game it will work in LFS for sure.

[skidpro]

Where are the setup directions for the G25 located?

[dawesdust_12]

There are none, it should just work in LFS, if not you should go to the Axis/FF tab in controls, go recalibrate, max everything out, and then click brake and then the axis corresponding, repeat for the remainder of axis, then turn FFB on, and lock calibration.

[Gunn]

The setup directions for LFS is all you should need. One thing though, if you want to use seperated pedals, there are two places to change that setting. One is in LFS and the other is in the windows control panel (game controllers). The control panel interface can also be reached directly from the Logitech profiler.
So the device needs to be set to non-combined pedals and the game needs to be set to seperate pedals.

[skidpro]

I will keep trying changing to seperate pedals in windows control panel and game opions was one of the first things I did.

[Woz]

When you say dont work what do you meean? On the axis screen do you see axis bars move when you move the pedals?

Finally... have you mappped the axis to the commands?

[skidpro]

After another 2 hours of messing with it I got it to work. See you online.

[bubbles]

I had a similar problem, I had to delete both the g25 software and lfs,

then re-install lfs first, then install the driver software(install the software from the cd directory)

Rebooted the computer, run lfs, exit lfs and open the driver software:

-Device
-Game Controlers
-Properties
-Settings
-Untick conbined single axis and change degress of rotation to 900*